CINOART PT2 TECHNICAL SUPPPORT

The Cinoart PT2 Automatic Tamper

The PT2 has been stress tested to perform over one million tamps reliably, efficiently and consistently.

Click here to download the PT2 instruction manual

  • Touchpad Control Panel

  • Silicone Grinds Tray

  • Power Plug

  • Tamper Disk

  • Upper Guide

  • Portafilter Support

  • Sensor

  • Height Adjustment Screws

Touchpad Control Panel

CINOART’s PTB-MY is compatible with all portafilter brands, including single, double and bottomless. Given the differences in portafilter height it is crucial that the fork is adjusted correctly prior to use to ensure tamping accuracy and consistency - and to prevent damage to the sensor.

Set up to three preset tamping pressures

Example: Pre-Set icons 10kg, 20kg or 30kg can be adjusted using the P adjustment buttons and then saved by a single push of the Dn-Up button.

Within each pressure preset of the PT2, you can set up to three individual and segmented tamping pressures.

You can also choose between a single, double, or triple tamp for each preset pressure.

Example: 1st Tamp value set at 8kg followed by the 2nd Tamp at 30kg of pressure or any value combination in between 2kg – 38kg.

Setting up a Segmented Multi-Tamp

  1. Select the Pre-Set Pressure icon you wish to adjust – either 10kg, 20kg or 30kg.

  2. Press the Increase T adjustment button and the Dn-Up button at the same time.

  3. The screen will then show the first (1) tamp pressure which you can adjust using the Increase/Decrease P adjustment buttons.

  4. To save changes press Dn-Up button.

  • Press and hold the Decrease (↓) T Tamp Adjustment button together with the Dn-Up button at the same time.

  • The exit Sleep Mode briefly press the Dn-Up button to wake up PT2.

The PT2 records the total tamps for each different tamping profile. A great feature for monitoring daily coffee sales.

Activate the Recording Function

  1. Press and hold the Pre-Set Pressure icon 10kg button together with the Dn-Up button at the same time.

  2. Single press Increase (↑) P Pressure Adjustment button, the Screen will then show 10 00.

  3. To save changes press Dn-Up button.

Check The Counter

  1. Press and hold the Pre-Set Pressure icon 20kg button together with the Dn-Up button at the same time.

  2. You will see the recorder on the Screen. The maximum record is 9999.

  3. To exit Check The Counter Mode briefly press Dn-Up button.

Clear The Record

  1. Press and hold the Pre-Set Pressure icon 30kg button together with the Dn-Up button at the same time.

  2. The Number on the Screen shows 00 00.

  3. To save changes press Dn-Up button.

The Cinoart PT2 works with all types of portafilter brands, sizes and designs and suits both 58 and 58.3mm baskets (including VST). Deep cleaning or changing the tamping disk will require removal of the existing tamping disk and GLS.

To do so:

  • Press and hold Dn-Up to enter Cleaning Mode – Tamper Comes Down

  • Turn the tamping disk and GLS counterclockwise to remove, and clockwise to install a new tamping disk

  • Press and hold Dn-Up to enter Cleaning Mode – Tamper Returns Up

Please see video below for instructions on how to remove and reinstall the tamping disk.

The Cleaning function lowers the Tamping Disk giving the user easy access for cleaning purposes.

  • Press and hold Dn-Up to enter Cleaning Mode – Tamper Comes Down

  • Press and hold Dn-Up to enter Cleaning Mode – Tamper Returns Up

Simply wipe the Tamping Disk with a non-abrasive cloth or brush to remove any grounds build up

Press and hold the Decrease (↓) P Pressure Adjustment button together with the Dn-Up button at the same time.

To log a service call, please click below

If you have any further questions or require additional technical support, please email support@workflow.coffee