PTB-MY AUTOMATIC TAMPER

PT2 AUTOMATIC TAMPER

PORTAFILTER CLEANER

Cinoart PT2 Automatic Coffee Tamper

The PT2 Automatic Coffee Tamper is a precision tool for helping baristas make the best coffee possible. It provides consistent and accurate tamping pressure, guaranteeing quality espresso every time.

The patented, in-built Guide Levelling System (GLS) helps eliminate channeling by levelling the coffee bed after tamping to provide an even extraction from edge to edge.

Working off a small footprint to maximise the working environment, the PT2 Automatic Coffee Tamper is easy to adjust and fits a variety of portafilter handles. Suction cup feet ensure it stays in place during service.

 PT2 FEATURES

guide-levelling-system.jpg

Guide Levelling System - GLS

CINOART’s patented GLS “Guide Levelling System” prevents channeling caused by uneven tamping ensuring the coffee bed is flat every time.

GLS upholds cup quality consistency as an uneven coffee bed creates under or over-extraction resulting in unwanted flavours.

- Select the ideal pressure setting for your desired recipe extraction times from between 2kg to 38kg.

- Assured pressures are delivered consistently even - upon different particle sizes and dosed volumes.

- Three programmable multi tamp settings.

- Built-in recording function to calculate total usage / cycles.

- Easy to adjust and fit a variety of Portafilter handles.

PT02.1343.jpg

Precision Pressure Control

- Set either single, double or triple tamp

- Each tamp cycle can be independently set to a specific pressure

Example: 1st Tamp value at 8kg followed by the 2nd Tamp at 30kg of down pressure or any value combination in between 2kg – 38kg

segmented-multi-tamping.jpeg

Segmented Multi Tamping

- Group handle detection sensor only activates in contact with metal (not fingers)

- Operates with 12 Volts via an inline step-down transformer

- Surge protection designed to the main electronic control board ensuring longevity and reliability.

precision-tamper-with-sensor.jpeg

Safety Assured

Nano Non-Stick Technology eliminates residual build-up of the coffee fines and oils ensuring the tamper stays clean

tamper-with-nano-coating.jpeg

Non-stick Coating

- Constructed using a strong cast alloy housing and all metal features ensures durability and reliability.

- Easy access for technical servicing.

Precision-tamper-structure.jpeg

Build Quality

Tamping disk diameter: 58MM Flat Base, optional 58.3MM

Pressure range: From 2 to 38KG

Tamp cycle speed: 1.2 Secs

Power to transformer: 10 amp – 240V 50/60Hz

Transformer voltage to PT2: 12V DC

Weight: 3.7KG

Dimensions: 318 x 127MM (H x ø)

Materials: Cast alloy housing - all metal features

20201202爆炸图.jpg

Specifications